Sealey VSE4783 User Manual
Page 2
3.2. Installing new bush.
3.2.1. Before installing a new bush, clean the inside of the front
control arm housing. Prior to installing the new bush, ensure
that the small arrow embossed on the bush aligns with the
front control arm in the position shown in fig.3. This will ensure
correct alignment of the wish-bone on refitting.
3.2.2. Assemble the installation (silver) set on the housing as in fig.4.
Adaptor (D) is threaded onto the short threaded end of the force
screw (F) with the ridged side facing inwards. Pass the force
screw (F) through the bush, through the front control arm
housing and position the Adaptor (E) over the force screw (F),
fitting it against the front control arm housing. Fit the bearing (H)
over the force screw (F), thread on the nut (G) and wind it up
to the adaptor (E). Double check to make sure that everything
is aligned and that the bush is sitting squarely against the front
control arm housing.
3.2.3. Using a 24mm deep socket or spanner, turn the nut (G)
clockwise. The bush will start to be pulled into the housing.
NOTE! If any undue resistance is felt, remove the assembly and
check that everything is correctly aligned.
3.2.4. Continue to turn the nut (G) to install the bush, when the bush
reaches the adaptor (E), the bush is fully installed (Fig.5).
3.2.5. Disassemble the tool, clean and lubricate before returning the
parts to the storage case.
3.2.6. Re-fit the wish-bone as per the vehicle manufacturer’s service
instructions or a proprietary manual.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
VSE4783 Issue: 2 - 23/08/11
01284 757500
01284 703534
www.sealey.co.uk
Web
fig.1
fig.3
fig.4
fig.5
fig.2