Sealey VS703 - Manual (Page 2)

2.1. Contents
2.1.1. check the contents (see parts below) and contact your supplier if any items are missing or damaged.
2.2.
Usage
2.2.1. remove bolt (fig.4.B) from handle (fig.4.A).
2.2.2. select the correct adaptor (fig.4.c), one which is slightly smaller than the diameter of the seal/bearing
race, and position it correctly on the handle, secure it using the bolt.
2.2.3. Place the seal/bearing race (fig.4.E or f) in the mouth of the housing (fig.4.D), place adaptor against it
and tap the driver handle to force it into place (fig.5).
2. OPERATION
3. PARTS
ALWAYS WEAR SAFETY GOGGLES WHEN USING DRIVERS
Users of drivers are reminded that damage to the striking faces can take place and we
recommend that safety goggles are worn when using this tool.
Vs703.V5-00 HAnDLE
Vs703.V5-01 ADAPtor, 39.5mm
Vs703.V5-02 ADAPtor, 44mm
Vs703.V5-03 ADAPtor, 50mm
Vs703.V5-04 ADAPtor, 59mm
Vs703.V5-05 ADAPtor, 63mm
Vs703.V5-06 ADAPtor, 64.5mm
Vs703.V5-07 ADAPtor, 72mm
Vs703.V5-08 ADAPtor, 76mm
Vs703.V5-09 ADAPtor, 81mm
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park ,
Bury st. Edmunds, suffolk,
IP32 7Ar
www.sealey.co.uk
Web
email
Original Language Version
Vs703.V5 Issue: 1 - 12/09/11
fig.5 fig.4