Maintenance – Sealey GA44 User Manual
Page 2
5.
MAINTENANCE
4.3
Measure the WHEEL ANGLES and the TOE-IN/OUT ANGLES for both left and right steering as described above and below.
COMPARE YOUR READINGS WITH THE VEHICLE MANUFACTURER’S RECOMMENDATIONS.
4.4
To measure FULL LOCK set the equipment up as described above in sections 4.1 and 4.2 and as shown in diagram1.
4.5
Remove the turntable locking pins.
4.6
Steer the wheels to FULL LEFT LOCK and take a reading from the right hand wheel.
4.7
Steer the wheels to FULL RIGHT LOCK and take a reading from the left hand wheel.
4.8
COMPARE READINGS AND CHECK WITH THE VEHICLE MANUFACTURER’S RECOMMENDATIONS.
5.1
Do not exceed the recommended loading for a pair of turntables of 1360kg (680kg each).
5.2
Do not use outdoors in wet conditions.
5.3
In the event of any problems do not dismantle the turntable. Return it to your local Sealey dealer.
5.4
Keep the external surfaces of the turntables free of oil and grease to prevent them slipping in use.
5.5
Do not use any solvents to clean the turntables. Use only a mild detergant and a damp cloth.
5.6
Lubricate all moving parts with a light oil.
GA44.V2 - 1 - 090307
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.