beautypg.com

Sealey VS011A User Manual

Assembled alignment tool, Contents of kit

background image

Thankyou for purchasing this Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

Important: Read these instRuctions caRefully. use this clutch aliGnMent tool coRRectly and With caRe foR the

PuRPose foR Which it is intended. failuRe to do so May cause daMaGe oR PeRsonal injuRy and Will invalidate the

WaRRanty. Retain these instRuctions foR futuRe use.

2. sPecification

1. safety instRuctions

WaRninG! Ensure that Health and Safety, local authority and general workshop practice regulations are adhered to when

using this tool.

do not use this tool if damaged.

Maintain tool in a good and clean condition for best and safest performance.

Ensure that the ignition key is removed, to prevent inadvertent engine cranking.

If the vehicle to be worked on is raised, ensure that it is adequately supported with axle stands or ramps and chocks.

Wear suitable clothing to avoid snagging.

do not wear loose jewellery and tie back long hair.

Account for all tools and parts being used.

If working off the vehicle, ensure that the workpiece is secure and stable.

do not use the alignment tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.

iMPoRtant: Always refer to the individual vehicle manufacturer’s service instructions, or a proprietary manual, to

establish the correct procedure and data for the use of this tool.

this document is provided as a guide only.

Necessary for pre-tensioning self adjusting clutches before removal or installation. Prevents plate distortion which can lead to

the clutch disengaging or dragging. Features a resetting tool and six alignment adaptors allowing the clutch adjuster to be

wound back.

Alignment adaptor sizes: Ø15/23mm, Ø15/28mm, Ø15/34mm, Ø21/23mm, Ø20/23mm, Ø14&15/20mm

Assembly Flywheel Threads: M6 x 1.0mm, M7 x 1.0mm, M8 x 1.25mm

Assembled alignment tool

I

NSTRUCTIONS FOR:

sac clutch aliGnMent tool

Model No

: vs011a.v2

Original Language Version

© Jack Sealey Limited 2012

VS011A .V2 ISSUE No:1 - 07/09/12

Contents of Kit

3. contents