Sealey VS011 User Manual
Vs011, Self adjusting clutch tool

INSTRUCTIONS FOR
SELF ADJUSTING CLUTCH TOOL
MODEL:
VS011
2. INTRODUCTION & APPLICATIONS
1. SAFETY INSTRUCTIONS
3. CONTENTS / PARTS LIST
VS011.01 MAIN CLAMP
VS011.02 SCREW PIN (SET OF 3)
VS011.03 STEPPED ADAPTOR
WARNING! Ensure that Health and Safety, local authority and general workshop practice
regulations are adhered to when using this product.
DO NOT use this product if damaged.
Maintain product in good condition for best and safest performance.
Ensure that the ignition key is removed, to prevent inadvertent engine cranking.
If the vehicle to be worked on is raised, ensure that it is adequately supported with axle
stands or ramps and chocks.
Wear suitable clothing to avoid snagging. Do not wear loose jewellery and tie back long hair.
Account for all tools and parts being used.
If working off the vehicle, ensure that the workpiece is secure and stable.
DO NOT use the alignment tool if you are tired or under the influence of alcohol, drugs or
intoxicating medication.
IMPORTANT: Always refer to the vehicle manufacturer’s service instructions, or a proprietary
manual, to establish the current procedure and data. This document is provided as a guide
only.
2.1. Introduction
High quality die-cast aluminium tool. Suitable for pre-tensioning clutch plate combination
prior to re-assembly.
2.2. Applications
BMW, Audi, Mercedes, Volvo, GM, Renault
VS011
Issue: 1 - 28/07/08
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and
component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our
latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web