beautypg.com

Sealey VS660 User Manual

Vs660, Oil drain plug thread repair set

background image

WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are

adhered to when using tools.

DO NOT use tools if damaged.

Maintain tools in good and clean condition for best and safest performance.

Ensure that a vehicle which

has been jacked up is

adequately supported with

axle stands.

Wear approved eye

protection. A full range of

personal safety equipment

is available from your

Sealey dealer.

Wear suitable clothing to

avoid snagging. Do not

wear jewellery and tie back

long hair.

Account for all tools and

parts being used and do

not leave any in or near

the engine.

1. SAFETY INSTRUCTIONS

2. INTRODUCTION & SpECIFICATION

3. INSTRUCTIONS

3.1.

To repair a damaged drain plug thread first establish the thread size of the damaged plug then

choose a tap that is slightly larger than the existing thread.

3.2.

Mount the tap in a suitable tap wrench and lightly oil it.

3.3

Introduce the tap into the damaged sump hole ensuring that it enters in line with the hole. Rotate the

tap until it begins to bite then advance it a half turn and back it off by a quarter turn.

3.4.

As thread cutting proceeds periodically remove the tap and clean it to prevent a build up of metal

shavings being deposited in the sump.

3.5.

Proceed until the tap is running freely in the hole then remove it.

3.6.

Fit the appropriate sump plug and washer and tighten.

3.7.

After the next use of the vehicle check that the plug and washer are oil tight.

INSTRUCTIONS FOR:

OIL DRAIN pLUG THREAD REpAIR SET

MODEL No:

VS660

2.1.

Introduction. Easily repair sump, gearbox and differential drain plug threads. Tap the damaged

thread, then fit a new drain plug and washer (supplied). Set is suitable for the most popular threads

used on cars and light commercial vehicles. Supplied in storage case.

2.2.

Specification. Tap Sizes: M13, M15, M17, M20

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMpORTANT: No liability is accepted for incorrect use of this product.

WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.

01284 757500

01284 703534

[email protected]

Sole UK Distributor, Sealey Group,

Kempson Way, Suffolk Business Park

,

Bury St. Edmunds, Suffolk,

IP32 7AR

www.sealey.co.uk

Web

email

Original Language Version

VS660 Issue: 1 - 15/03/10

IMPORTANT: pLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OpERATIONAL REQUIREMENTS,

WARNINGS, AND CAUTIONS. USE THIS pRODUCT CORRECTLY, AND WITH CARE FOR THE pURpOSE FOR WHICH IT IS

INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR pERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these

instructions and properly maintained, give you years of trouble free performance.