Sealey AK456 User Manual
Ak456, Safety instructions, Introduction

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free
performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
Maintain pump in good condition (use an authorised service agent).
Replace or repair damaged parts. Check the grease bucket to ensure it is not
damaged. Use recommended parts only. Unauthorised parts may be dangerous and
will invalidate the warranty.
Wear appropriate protective clothing. When handling lubricants refer to
manufacturer’s instructions and conform to local regulations.
Use the pump in an appropriate working area for its function. Keep area clean and tidy
and free from unrelated materials and ensure there is adequate lighting.
Maintain correct balance and footing. Ensure floor is not slippery, wear non slip
shoes.
Keep children and unauthorised persons away from the working area.
Dispose of waste grease in accordance with local authority regulations.
DO NOT allow unauthorised persons to operate the pump.
DO NOT point grease nozzle at yourself or other persons or animals.
DO NOT pull the pump unit by the hoses.
DO NOT force the pump to achieve a task it was not designed to perform.
DO NOT operate the pump when you are tired, under the influence of alcohol, drugs
or intoxicating medication.
When not in use store in a dry, safe, childproof area.
2.
INTRODUCTION
Zinc die-cast pump head with solid steel pump. High-volume, low-pressure output for
filling auto chassis lubrication reservoirs.
Central lube coupling supplied with spare plug-in adaptor.
InstRUCtIons foR:
CHASSIS LUBE LOW PRESSURE FILLER PUMP UNIT
Model no:
AK456
3.
ASSEMBLY
4.
PARTS
Note: numbers in brackets refer to item numbers on the parts diagram.
3.1. Pass the pump (1) through the adaptor (3) fitted to the lid (4).
3.2. tighten the clamp on the adaptor (3).
3.3. fit the unit to a bucket of grease, securing the lid by using the three fixing
screws (5).
3.4. the unit is now ready for use.
Item Part No. Description
1
AK456.1 Pump
2
AK456.2
screw pack
3
AK456.3
Adaptor
4
AK456.4
Lid
5
AK456.5
Lid screws
6
AK456.6
Hose clip
7
AK456.7
Hose tail
8
AK456.8
female coupler
9
AK456.9
Delivery tube
10 AK456.10 Male adaptor
11 AK456.11 Hose, 1.5M
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, suffolk Business Park
,
Bury st. Edmunds, suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
AK456 Issue: 3 - 10/02/10