Sealey X136 - Manual (Page 2)

01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
Sole UK Distributor
Sealey Group, Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications
and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date. proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full
name and address including your postcode.
3. ASSEMBLY AND OPERATING INSTRUCTIONS
Note: Numbers shown in brackets refer to item numbers on the parts diagram.
3.1. Assembly
3.1.1. Slide the expansion beams (2) into the ends of the fixed beam (5), ensuring the threaded holes protrude
from the fixed beam.
3.1.2. Screw in the adaptors (1) and secure the chains (3) using the bolts (4).
3.2. Operating
3.2.1. Remove the saddle from the jack.
3.2.2. Fit the cross beam adaptor to the jack. Secure using the bolt (7) and washer (6). Note: The securing
bolt can only be used on models 2080CX and 3080CX.
3.2.4. Adjust the position of the adaptors to ensure they are under the lifting the points recommended by the
vehicle manufacturer (see vehicle handbook), before commencing the jacking operation.
5. PARTS
Item Description Item Description Item Description
1 Adaptor 4 Bolt 6 Washer
2 Expansion beam 5 Fixed beam 7 Bolt
3 Chain
01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
Sole UK Distributor
Sealey Group, Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications
and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date. proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full
name and address including your postcode.
3. ASSEMBLY AND OPERATING INSTRUCTIONS
Note: Numbers shown in brackets refer to item numbers on the parts diagram.
3.1. Assembly
3.1.1. Slide the expansion beams (2) into the ends of the fixed beam (5), ensuring the threaded holes protrude
from the fixed beam.
3.1.2. Screw in the adaptors (1) and secure the chains (3) using the bolts (4).
3.2. Operating
3.2.1. Remove the saddle from the jack.
3.2.2. Fit the cross beam adaptor to the jack. Secure using the bolt (7) and washer (6). Note: The securing
bolt can only be used on models 2080CX and 3080CX.
3.2.4. Adjust the position of the adaptors to ensure they are under the lifting the points recommended by the
vehicle manufacturer (see vehicle handbook), before commencing the jacking operation.
5. PARTS
Item Description Item Description Item Description
1 Adaptor 4 Bolt 6 Washer
2 Expansion beam 5 Fixed beam 7 Bolt
3 Chain
X136 -1 - 300902 X136 -1 - 300902