Sealey 57M User Manual
Page 2
3.1. General jacking.
p
WARNING! Before lifting ensure Section 1 safety instructions are strictly followed.
3.1.1. Prepare the vehicle as mentioned in the safety instructions ensuring the ground on which
the jack is to stand is level and solid (not tarmacadam).
3.1.2. Position the jack saddle under the vehicle manufacturer’s recommended lifting point.
3.2. Jacking the vehicle.
3.2.1. Turn the handle clockwise to bring the jack saddle into contact with the recommended
lifting point.
3.2.2. Ensure the jack is vertical before continuing to turn the handle clockwise and raising
the vehicle to the required working height. Turn the handle slowly and evenly to ensure no
sudden movements of the vehicle.
3.3. Lowering the vehicle
3.3.1. Turn the handle anti-clockwise and lower the vehicle. Lower slowly to ensure no sudden
movements of the vehicle.
p
SAFETY WARNING! Always lower in a slow and controlled manner and ensure there
are no persons or obstacles beneath the vehicle, or in the path of it’s descent.
Lifting operations and Lifting Equipment regulations (LoLEr) 1998. This jack, depending on
use, may fall within the scope of LoLEr. It is the owner’s responsibility to determine whether or
not it does and, if so, to comply with any applicable requirements in LoLEr, for having the jack
thoroughly examined.
IMPORTANT: Only fully qualified personnel should attempt maintenance or repair.
4.1. Keep the jack clean and lubricate all moving parts with acid free oil on a regular basis.
4.2. Before each use check for broken, cracked, bent, or loose parts, or any visible
damage to welds, saddle, frame and all parts including nuts, bolts, pins and other
fasteners. If any suspect item is found remove jack from service and take necessary
action to remedy the problem.
DO NOT use the jack if believed to have been
subjected to abnormal load or shock. Inspect and take appropriate action.
IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR INCORRECT USE OF THE JACK.
3. OPERATING INSTRUCTIONS
4. MAINTENANCE
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: no liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7Ar
www.sealey.co.uk
Web
Original Language Version
57M.V2, 58M Issue: 4 - 14/10/09