Operation, Maintenance – Sealey ES750 User Manual
Page 2
parts support is available for this product. to obtain a parts listing and/or
diagram, please log on to www.sealey.co.uk, email [email protected] or phone 01284 757500.
WarnIng! before use ensure you have read, understood and apply section 1
“safety Instructions”.
4.1 posItIonIng stand beneath exhaust sYsteM.
WarnIng! Before use ensure the exhaust weight and size does not exceed the
capacity of the stand.
WarnIng! ensure the vehicle from which the exhaust is to be removed is correctly
positioned, handbrake applied, and raised to allow the exhaust stand to be positioned
correctly.
4.1.1 ensure there are no other persons around or under the vehicle.
4.1.2 ensure saddle is in its lowest position and centrally position stand beneath vehicle’s
exhaust.
4.1.3 rotate handle (10) in a clockwise direction to raise the saddle.
4.1.4 When saddle is just beneath the exhaust re-adjust alignment if necessary to centralise
the saddle.
4.2 LIFtIng/LoWerIng the exhaust.
WarnIng! ensure the load is central and stable on the stand saddle and load is fixed
in place before attempting to lift or lower.
4.2.1 rotate the handle in an anti-clockwise direction to lower the saddle, rotate the handle in
a clockwise direction to lift the saddle.
danger! do not use on tarmacadam, or any soft surface as stand may sink or
topple. serious personal and/or fatal injury may result.
danger! if stand tips or leans, stop What Your are doIng. Move QuICkLY
to a saFe dIstanCe. do not trY to hoLd or steadY stand.
4. operatIon
Original Language Version
5. MaIntenanCe
5.1. When not in use, lower the saddle so that the threaded rod is all within the column and
thus protected from corrosion.
5.2. Before each use, ensure components are in good working order. if any suspect item is
found remove stand from service and take necessary action to remedy the problem.
do not use the stand if you believe it has been subjected to an abnormal load or
shock load.
5.3. lubricate all moving parts on a regular basis.
5.4. Periodically check the stand for signs of corrosion. clean exposed areas with a clean
oiled cloth.
IMportant: all other maintenance and repair must only be undertaken by fully
qualified personnel. contact your local authorised service agent. imPortAnt: no
resPonsiBilitY is AccePted for incorrect use of tHe stAnd.
es750.V2 issue no:1 10/01/10
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMportant: no liability is accepted for incorrect use of this product.
WarrantY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
InForMatIon: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
sole uk distributor, sealey group,
Kempson Way, suffolk Business Park
,
Bury st. edmunds, suffolk,
iP32 7Ar
www.sealey.co.uk
Web