Sealey ES600 - Manual (Page 2)

01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
Sole UK Distributor
Sealey Group, Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date. proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full name and
address including your postcode.
Issue: 1
Date: 251002
4.2. Attach the chains to engine lifting points and hook them over the “J” hooks as shown in
fig.3. Note: Refer to manufacturer’s handbook to identify lifting brackets.
4.3. Tighten the nuts (5) to tension the chain and support the engine.
4.4. On completion of the maintenance task, loosen the nuts (5) to release the tension on
the chain. Remove the engine support from the vehicle.
4.5. Remove the chain from the engine lifting points.
5. PARTS
Item Part No Description Item Part No Description
1 ES600-01 Beam 9 ES600-09 Chain
2 ES600-02 Washer 11 ES600-11 Moveable beam assembly
3 ES600-03 Standing platform assembly 12 ES600-12 Telescopic beam assembly
4 ES600-04 Bolt 13 ES600-13 Pin
5 ES600-05 Nut 14 ES600-14 Ring
6 ES600-06 Washer 15 ES600-15 Support arm
7 ES600-07 Moveable beam 16 ES600-16 Telescopic beam
8 ES600-08 “J” Hook
ES600 - 1 - 251002
Fig. 3
01284 757500
E-mail: [email protected]
Web: www.sealey.co.uk
01284 703534
Sole UK Distributor
Sealey Group, Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component
parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this equipment.
WARRANTY: Guarantee is 12 months from purchase date. proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full name and
address including your postcode.
Issue: 1
Date: 251002
4.2. Attach the chains to engine lifting points and hook them over the “J” hooks as shown in
fig.3. Note: Refer to manufacturer’s handbook to identify lifting brackets.
4.3. Tighten the nuts (5) to tension the chain and support the engine.
4.4. On completion of the maintenance task, loosen the nuts (5) to release the tension on
the chain. Remove the engine support from the vehicle.
4.5. Remove the chain from the engine lifting points.
5. PARTS
Item Part No Description Item Part No Description
1 ES600-01 Beam 9 ES600-09 Chain
2 ES600-02 Washer 11 ES600-11 Moveable beam assembly
3 ES600-03 Standing platform assembly 12 ES600-12 Telescopic beam assembly
4 ES600-04 Bolt 13 ES600-13 Pin
5 ES600-05 Nut 14 ES600-14 Ring
6 ES600-06 Washer 15 ES600-15 Support arm
7 ES600-07 Moveable beam 16 ES600-16 Telescopic beam
8 ES600-08 “J” Hook
ES600 - 1 - 251002
Fig. 3