Sealey PH10 - Manual

Page 1
INSTRUCTIONS FOR:
1 TONNE LOW PROFILE ENGINE CRANE
MODEL No: PH10.V4
2. GENERAL
1. CONTENTS
Section 2. General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.1. Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 2.2. Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.
Section 3. Safety / Operational Instructions. . . . . . . . . . . . . . . . . .2.
Section 4. Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.
Section 5. Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.
Section 6. Maintenance/ Examination/ Inspection. . . . . . . . . . . . .3.
Section 7. Owner's & Operator's Responsibilities . . . . . . . . . . . . .3.
Section 8. Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . .4.
Section 9. Parts List/ Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 5 & 6.
Page No.
2.1 Identification
Supplier: Sealey Power Products,
Kempson Way,
Suffolk Business Park,
Bury St Edmunds,
Suffolk, IP32 7AR.
Model No: PH10.V4
2.2 Technical Data
Rated Capacity
Safe Working Load (SWL) 1tonne (tested to 50% overload).
Lifting Cap. in Position 1: . . . . . . . . . . . . . . 1000kg
Lifting Cap. in Position 2: . . . . . . . . . . . . . . 750kg
Lifting Cap. in Position 3: . . . . . . . . . . . . . . 500kg
Lifting Cap. in Position 4: . . . . . . . . . . . . . . 250kg
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76kg
a) Design Capability: Test Load 50% overload.
b) For a description of in-service and out-of-service conditions see
section 3 Safety, Section 6 Maintenance and Section 7.
c) The crane is fitted with a bypass valve that will prevent the ram
from over extending.
d) For applications see Section 3 Safety.
e) For control system, see Fig.1 for release valve and pump handle
assy. Usage is explained in Section 5 Operation.
f) For ground condition requirements, see Section 3 Safety.
g) For information on parts and materials requiring specialised
repair techniques see Section 6 Maintenance.
Original Language Version
PH10.V4 Issue: 2 - 01/12/14
fig.1
© Jack Sealey Limited
Fig.1
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Refer to
instruction
manual
Wear
protective
footwear
Wear
protective
gloves