Sealey SSG8E - Manual (Page 2)

5. MAINTENANCE
5.1.

WARNING! Disconnect from the air supply before performing any maintenance!
 WARNING! Wear ear, eye, hand and respiratory protection when undertaking any maintenance.
5.2. Gun maintenance. Keep all parts of the gun clean for best performance.
5.2.1. Lubricate the plunger, between the trigger and the gun handle with a light grease.
4. OPERATION
 WARNING! Ensure that you read, understand and apply the safety instructions in Section 1 before use.
 WARNING! Wear approved ear, eye, hand and respiratory protection when operating the blaster.
4.1. Attach an air line to the gun which has a 1/4” bsp fitting.
4.2. Remove the grit container from the gun by twisting it anticlockwise until it stops, then pull it off the head. Fill the container blasting medium.
Align the three pins in the neck of the container with the corresponding gaps in the head flange and push the container onto the head.
Twist the container clockwise to seal it to the head.
4.3. We advise strongly that you test the action of the gun first on some scrap material before proceeding to the actual job.
4.4. Partially depress the trigger to get a light feathering action on the area to be cleaned. Inspect the results and proceed as neccessary.
Depressing the trigger fully will give the strongest blasting action.
4.5. When work is complete disconnect the gun from the air supply. Remove the main grit container and empty any unused grit back into a
suitable container.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version SSG8E V3 Issue: 1 - 22/02/13 © Jack Sealey Limited
SSG8E.V3
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which is compatible with the environment.