Sealey AP1520 User Manual
Ap1520, Woodworking bench 1.52 mtr
INSTRUCTIONS FOR:
WOODWORKING BENCH 1.52mtr
MODEL
:
AP1520
Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
1.
SAFETY INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2.
CONTENTS
1.1
GENERAL SAFETY
!
WARNING! Ensure Health & Safety, local authority, and general
workshop practice regulations are adhered to when using this
bench.
"
Locate bench in a suitable working area.
"
Keep the work area clean, uncluttered and ensure there is adequate lighting.
!
WARNING! Use bench on level and solid floor surface.
"
Keep the bench clean and tidy in accordance with good workshop practice.
"
Keep children and unauthorised persons away from the working area.
#
DO NOT use the bench for any purpose other than that for which it is
designed.
#
DO NOT undertake work on the bench without the workpiece being
adequately secured.
#
DO NOT use the bench out of doors.
#
DO NOT get the bench wet or use in damp or wet locations or areas where
there is condensation.
#
DO NOT clean the bench with any solvents which may damage the paint
surface or the protective coating on the wooden top.
AP1520 - 1 - 14/09/06
2.1
Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make
immediate contact with your Sealey dealer.
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web