Sealey AK293 - Manual (Page 2)

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey
Group, Kempson Way, Suffolk
Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version AK293 Issue: 3 - 09/08/11
 WARNING! Ensure you have read and understood the safety instructions in Section 1 before using the torch.
4.1. Lighting the torch.
4.1.1. Turn the adjustment knob counter-clockwise until escaping gas can be heard (fig.2).
4.1.2. Press the ignition button and the flame will ignite (fig.3).
4.1.3. If the flame does not ignite, check and adjust the gas/air mix by rotating the air control sleeve (see fig.A). Press ignition button again
to ignite.
4.2. Temperature Adjustment.
4.2.1. Using the adjustment knob, regulate the length of the flame to approximately 10-25mm.
Note: An excessively long flame will waste gas.
4.2.2. Adjust the temperature by rotating the air control sleeve and varying the size of the air inlet.
a. Large air inlet = high temperature.
b. Small air inlet = low temperature.
4.3. Turning the torch off.
4.3.1. Turn the adjustment knob clockwise to shut off the flame (fig.4).
4. OPERATION
fig.3 fig.4 fig.2 fig.1