Sealey SG14 - Manual (Page 2)

 WARNING! Ensure you read, understand and apply the safety
instructions in Section 1 and follow the manufacturer’s instructions
on the underseal/wax container.
4.1 Screw on a canister of schutz underbody coating.
4.2 Ensure air supply is regulated to no more than 6 bar (90psi) and then attach
air hose to the gun.
4.3 Aim the nozzle of the gun into a safe area and depress the gun trigger to
check for correct operation.
4.4 INJECTION PRObE
4.4.1 The SG14.V3 is supplied with an injection probe (fig.3) for use with wax.
The flexible probe enables wax to be sprayed into cavities, between
panels and inside doors etc.
4.4.2 The probe fits in place of the nozzle.
4. OPERATING INSTRUCTIONS
5. MAINTAINANCE
Fig 3
5.1 ClEANING
5.1.1 To prolong the life of the gun and to maintain its performance ensure that all parts are thoroughly cleaned
after every use. Spray an appropriate solvent for the coating material through the gun, so that no
deposits are left inside the gun or nozzles.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version SG14.V3 Issue: 2 - 09/12/09