Sealey AK39602 - Manual (Page 2)

Original Language Version
fig. 3
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
7. ALUMINIUM RIVETS
8. SERVICE PARTS
Aluminium threaded and pop rivets are available from your Sealey dealer.
Nut Rivets Thread Quantity Sheet Thickness
AK396/2 M4 x 0.7 50 0.5 - 2.5mm
AK396/3 M5 x 0.8 50 0.5 - 2.5mm
AK396/4 M6 x 1.0 15 1.0 - 4.0mm
AK39602/1 M8 x 1.25 10 1.0 - 4.0mm
AK39602/2 M10 x 1.5 10 1.0 - 4.0mm
6. MAINTENANCE
5.2.9. Squeeze the riveter handles to compress the nut rivet. When the rivet has formed a retaining bulge
against the rear face of the sample (fig. 3) keep light pressure on the handles and screw in the mandrel (fig. 2.E)
until the handles are closed. Lock the mandrel in position by tightening the lock nut. All following rivets will be
deformed to the same degree when the handles are fully closed.
the setting applies only to the one rivet size and the one workpiece thickness - the test must be
repeated each time there is a change in nut size and/or workpiece thickness.
5.2.10. unscrew the mandrel bar from the nut rivet by turning the knurled end of the draw bar body (fig. 2.f) and
then screw on a new nut rivet for the next operation.
6.1. Keep all pivots lightly oiled.
6.2. the jaw case assembly (fig. 4) should be disassembled, cleaned and oiled at regular intervals, depending on the frequency of use.
the need for cleaning/jaw (fig. 4.A) replacement will be indicated by the riveter failing to grip the rivet shaft.
Pop Rivets Quantity Size
AK99/1 100 3.2(1/8”) x 6.2mm
AK99/2 100 3.2(1/8”) x 7.4mm
AK99/3 100 4.0(5/32”) x 8.0mm
AK99/4 100 4.8(3/16”) x 8.9mm
AK99/6 2000 3.2(1/8”) x 10.2mm
AK99/7 1200 4.0(5/32”) x 10.2mm
AK99/8 800 4.8(3/16”) x 10.2mm
the following service parts are available:
Part No. Description
AK39602/05 Jaws
AK39602/26M4 Mandrel and Bar, M4 Nut Rivet
AK39602/26M5 Mandrel and Bar, M5 Nut Rivet
AK39602/26M6 Mandrel and Bar, M6 Nut Rivet
AK39602/26M8 Mandrel and Bar, M8 Nut Rivet
AK39602/26M10 Mandrel and Bar, M10 Nut Rivet
AK39602/9-3.2 Mandrel, 3.2mm Pop Rivet
AK39602/9-4.0 Mandrel, 4.0mm Pop Rivet
AK39602/9-4.8 Mandrel, 4.8mm Pop Rivet
AK39602/9-6.4 Mandrel, 6.4mm Pop Rivet (Small)
AK39602/9-6.4 Mandrel, 6.4mm Pop Rivet (Large)
fig. 4
A
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
AK39602 Issue: 2(L) - 21/07/14
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
© Jack Sealey Limited