Sealey SA630 - Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,
WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH
IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL INJURY AND WILL INVALIDATE THE
WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
3
Follow all workshop safety rules, regulations, and conditions when using wrench.
p
WARNING! Disconnect from air supply before changing accessories or servicing.
3 Maintain the wrench in good condition and replace any damaged or worn parts. Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p
WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Use only impact sockets which are specifically designed for use with a ratchet wrench.
3 Wear approved safety eye/face shield, ear defenders, and hand protection.
3 Wear suitable clothing to avoid snagging. DO NOT wear loose jewellery and tie back long hair.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and non essential persons away from the working area.
7
DO NOT use the wrench for a task it is not designed to perform.
p WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
7 DO NOT use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
7
DO NOT operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
7
DO NOT direct air from the air hose at yourself or others.
3 When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION & SPECIFICATIONS
MODEL. . . . . . . . . . . . . . . . . SA630.V3
Drive size . . . . . . . . . . . . . . . . . . 1/4”Sq
Max torque . . . . . . . . . . . . . . . . . 25ft/lb
Air consumption . . . . . . . . . . . . . 3cfm
Operating pressure. . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . .1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . 0.6kg
Noise Power . . . . . . . . . . . . . . . . 98dBA
Noise Pressure. . . . . . . . . . . . . . 91dBA
Vibration . . . . . . . . . . . . . . . . . . 3.7m/s²
Uncertainty . . . . . . . . . . . . . . . 1.83m/s²
MODEL. . . . . . . . . . . . . . . . . SA631.V3
Drive size . . . . . . . . . . . . . . . . . . 3/8”Sq
Max torque . . . . . . . . . . . . . . . . . 25ft/lb
Air consumption . . . . . . . . . . . . . 3cfm
Operating pressure. . . . . . . . . . . . 90psi
Air inlet size . . . . . . . . . . . . . . .1/4”BSP
Weight . . . . . . . . . . . . . . . . . . . . 0.6kg
Noise Power . . . . . . . . . . . . . . . . 98dBA
Noise Pressure. . . . . . . . . . . . . . 91dBA
Vibration . . . . . . . . . . . . . . . . . . 3.7m/s²
Uncertainty . . . . . . . . . . . . . . . 1.83m/s²
Composite cover moulded around lightweight aluminium housing reduces chill effects on
operator’s hands and provides added control. Air motor with quality bearings for smooth powerful
operation. Exhaust outlet adjusts 360° keeping air flow away from operator. Mini design is ideal for
working around engines where space is limited. Features twist reverse action and trigger operated
power control. Hardened gear and yoke assembly ensures suitability for the professional
workshop.
Original Language Version
SA630.V3, SA631.V3 Issue: 2 - 04/03/14
INSTRUCTIONS FOR:
AIR MINI RATCHET WRENCH PREMIER
MODEL No’s:
SA630.V3, SA631.V3
© Jack Sealey Limited