Danger of fire/explosion hazard – Sealey SA653 User Manual

Page 3

b) Grit or gum deposits in the die grinder may also reduce performance. If your model has an air strainer

(located in the area of the air inlet), remove the strainer and clean it. Flush the die grinder out with

gum 0solvent oil or an equal mixture of SAE No 10 oil and paraffin. Allow to dry before use.

5.4. For a full service contact your local Sealey service agent.

5.5. When not in use, disconnect from air supply, clean die grinder and store in a safe, dry, childproof location.

5.6. Periodically lubricate crown and pinion gear with general purpose grease through the grease nipple on

head.

Danger of Fire/Explosion Hazard



WARNING! The grinding process can produce streams of sparks (especially when grinding metal), which

are a potential source of ignition.


DO NOT use the grinder where there are flammable liquids, solids or gases.



DO NOT allow grinder sparks to make contact with the operator’s clothing or any other fabric such as

cleaning rags. Fabrics contaminated with inflammable materials such as petrol, oil, grease, paint and

solvents are a particular fire hazard.


To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated

with a fire retardant in preference to man-made fibres.

Original Language Version

SA653.V3 Issue: 2 (SP) - 02/09/13