Maintenance – Sealey SA651 User Manual
Page 3
WARNING! Disconnect the tyre buffer from the air supply before changing accessories,
servicing or performing maintenance. Replace or repair any damaged parts. Use genuine
parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
5.1. If the air system does not have an oiler, lubricate the tyre buffer daily, with a few drops of
Sealey air tool oil dripped into the air inlet to prolong its life.
5.2. Clean the tyre buffer after use. DO NOT use worn or damaged buffing cones.
5.3. Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To remedy check the air supply and follow instructions in
chapter 3.
b) Grit or gum deposits in the tyre buffer may also reduce performance. If the model has an
air strainer (located in the area of the air inlet), remove the strainer and clean it. Flush
the tyre buffer out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin.
Allow to dry before use.
5.4. For a full service, contact your local Sealey service agent.
5.5. When not in use, disconnect from air supply, clean tyre buffer and store in a safe, dry,
childproof location.
5. MAINTENANCE
Risk of Hand Arm Vibration Injury.
The SA651.V3 Air Tyre Buffer Premier, when operated in accordance with these instructions and tested in accordance with
EN 28662-1: 1993 results in the following vibration emission declared in accordance with BS EN12096: 1996.
Measured vibration emission value: ...................... 1.9m/s²
Uncertainty value: ................................. 0.76m/s²
These values are suitable for comparison with emission levels of other tools that have been subject to the same test.
This tool may cause hand-arm vibration syndrome if its use is inadequately managed.
Recommended Measures to reduce risk of hand-arm vibration syndrome: This item represents a low Hand Arm Vibration risk
to users. The calculated maximum usage period exceeds 8 hours. We recommend appropriate safety equipment is utilised and
regular breaks for the operator are employed to reduce any residual risk of fatigue or repetitive strain injury.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
SA651.V3 Issue: 1 - 20/10/11