Melinera Z30094A-D - Manual (Page 51)

51 GB/MT
Preparing for use / Use ... / Use / Maintenance / Cleaning / Care
Q
replacing the bulb
WArNING! rISK tO LIFE FrOM ELECtrIC ShOCK!
Pull the adapter 11 out of the mains socket before performing
any tasks on the product.
j Release the screws 17 on the lamp attachment assembly 1
using a screwdriver (see Figure B).
j Take off the halogen bulb 18 . Insert a new halogen bulb 18 (see
Figure B).
j Retighten the screws 17 using a screwdriver.
Q
Maintenance / Cleaning / Care
J WArNING! DANGEr tO LIFE FrOM ELEC-
trIC ShOCK! Before doing any work on the prod-
uct, pull the adapter
11 out of the socket.
j Ensure that the water level never drops below the MIN marking
(inside) wall of water container 12 .
j Fill up or change the “distilled” water when the water level is be-
low the MIN mark (see “Changing the water”). Check the water
level by slightly raising the base
6 . If no water flows from the or-
namental stone 2 , and the mains adapter 11 is connected to a
mains socket, then the water level is probably too low.
j Change the “distilled” water at least once a week (see “Chang-
ing the water”). This will prevent algae from forming.
j Check and clean the tabletop fountain, pebbles 13 , water con-
tainer 12 and pump 8 at regular intervals. Never use aggres-
sive or corrosive cleaning agents to do this. Ensure that no foreign
bodies can enter the pump
8 or the connection hose 7 .
j Pour out the water and allow the tabletop fountain to dry com-
pletely if you are going to leave it unused for an extended period
(see “Changing distilled the water”).