Preparing for use / use, Changing the distilled water – Melinera Z30094A-D User Manual
Page 50
50 GB/MT
Preparing for use / Use
switch the tabletop fountain on. The lamp halogen bulb
18
illumi-
nates and water flows out of the ornamental stone
2
.
Note: Brush your hand across the water ouwtlet in the ornamen-
tal stone
2
to ensure that the water flows evenly out of the orna-
mental stone
2
.
j
Pull the adapter
11
out of the socket to switch off the tabletop
fountain.
Q
Changing the distilled water
WArNING!
rISK OF LOSS OF LIFE BY ELECtrIC
ShOCK! Ensure that the pump plug
9
does not fall into the water
or come into contact with water.
Note: To prevent algae from forming, change the water at regular
intervals – at least 1 x per week - and clean the water container
12
.
WArNING!
rISK OF LOSS OF LIFE BY ELECtrIC
ShOCK! Pull the adapter
11
out of the socket.
j
Separate the pump plug
9
from the connection plug
10
.
j
Remove the base
6
together with ornamental stone
2
from the
water container
12
.
j
Pull the connection hose
7
from the connection piece
15
.
j
Place the base
6
together with the ornamental stone
2
, lamp
attachment assembly
1
and pump
8
carefully to one side.
j
Pour out the water carefully. Clean the water container
12
with a
soft cloth (or similar) and a little cleaning agent, if necessary.
Remove limescale deposits from the water container
12
when
required using an ordinary limescale remover.
j
Fill the water container
12
with fresh water up to the MAX mark-
ing (inside wall) of the water container
12
.
j
Reassemble the tabletop fountain (see “Assembly”).