Replacing the bulb, Maintenance / cleaning / care – Melinera Z31300-BS User Manual
Page 40
40 GB/MT
Remove the base
6
together with ornamental stone
2
from the
water container
12
.
Pull the connection hose
7
from the connection piece
15
.
Place the base
6
together with the ornamental stone
2
, lamp
attachment assembly
1
and pump
8
carefully to one side.
Pour the water carefully out of the drainage hole
9
. Clean the
water container
12
with a soft cloth (or similar) and a little clean-
ing agent, if necessary. Remove limescale deposits from the water
container
12
when required using an ordinary limescale remover.
Fill the water container
12
with fresh water up to the MAX mark-
ing (inside wall) of the water container.
Reassemble the tabletop fountain (see “Assembly”).
Q
Replacing the bulb
RIsK To LIFE FRoM ELECTRIC shoCK!
Pull the adapter
11
out of the mains socket before performing any
tasks on the product.
Release the screws
17
on the lamp attachment assembly
1
using a screwdriver (see Figure B).
Take off the halogen bulb
18
. Insert a new halogen bulb
18
(see
Figure B).
Retighten the screws
17
using a screwdriver.
Maintenance / Cleaning / Care
DANgER To LIFE FRoM ELEC-
TRIC shoCK! Before doing any work on the prod-
uct, pull the adapter
11
out of the socket.
Ensure that the water level never drops below the MIN marking
(inside) wall of water container
12
.