Switching the tabletop fountain on and off, Changing the distilled water – Melinera Z31300-BS User Manual
Page 39
39
GB/MT
Fill the water container
12
with water up to the MAX marking
(inside wall) of the water container
12
.
Increase (MAX) or reduce (MIN) the flow of water issuing from
the ornamental stone
2
by means the + / - slider
14
(Fig. C).
Place the base
6
with the attached pump
8
on the water
container
12
and guide the lead from the pump
8
through the
recess
16
.
Decorate the base
6
with the pebbles
13
.
Your tabletop fountain is now ready for use.
Q
switching the tabletop fountain on and off
Insert the adapter
11
into a properly installed mains socket to
switch the tabletop fountain on. The lamp halogen bulb
18
illumi-
nates and water flows out of the ornamental stone
2
.
Note: Brush your hand across the water outlet in the ornamental
stone
2
to ensure that the water flows evenly out of the orna-
mental stone.
Pull the adapter
11
out of the socket to switch off the tabletop
fountain.
Changing the distilled water
RIsK oF Loss oF LIFE BY ELECTRIC shoCK!
Ensure that the adapter
11
does not fall into the water or come into
contact with water.
Note: To prevent algae from forming, change the water at regular
intervals – at least 1 x per week - and clean the water container
12
.
RIsK oF Loss oF LIFE BY ELECTRIC shoCK!
Pull the adapter
11
out of the socket.