Switching the tabletop fountain on and off, Changing the distilled water – Melinera Z31300-BS User Manual
Page 9
9
GB/CY
Fill the water container
12
with water up to the MAX marking
(inside wall) of the water container
12
.
Increase (MAX) or reduce (MIN) the flow of water issuing from
the ornamental stone
2
by means the + / - slider
14
(Fig. C).
Place the base
6
with the attached pump
8
on the water
container
12
and guide the lead from the pump
8
through the
recess
16
.
Decorate the base
6
with the pebbles
13
.
Your tabletop fountain is now ready for use.
Q
Switching the tabletop fountain on and off
Insert the adapter
11
into a properly installed mains socket to
switch the tabletop fountain on. The lamp halogen bulb
18
illumi-
nates and water flows out of the ornamental stone
2
.
Note: Brush your hand across the water outlet in the ornamental
stone
2
to ensure that the water flows evenly out of the orna-
mental stone.
Pull the adapter
11
out of the socket to switch off the tabletop
fountain.
Q
Changing the distilled water
RISK OF LOSS OF LIFE BY ELECTRIC SHOCK!
Ensure that the adapter
11
does not fall into the water or come into
contact with water.
Note: To prevent algae from forming, change the water at regular
intervals – at least 1 x per week - and clean the water container
12
.
RISK OF LOSS OF LIFE BY ELECTRIC SHOCK!
Pull the adapter
11
out of the socket.