Melinera Z31300-BS - Manual (Page 8)

8 GB/CY
Only carry out work on the device when the adapter 11 has
been disconnected from the mains current.
Never run the pump 8 without water.
Q
Before first use
Select a suitable location for the tabletop fountain.
Ensure that the supporting surface is solid, flat and even.
CAUTION! If the supporting surface is uneven, the assembled
and water-filled tabletop fountain could overturn, resulting in
injury and / or damage to the product.
CAUTION! Risk of fire if the halogen bulb 18 falls over.
CAUTION! RISK OF INJURY! Never try to move the tabletop
fountain if it is filled with distilled water. This could result in injury
or damage to property.
Q
Preparing for use / Use
Q
Assembly
Unpack the product and the accessories carefully.
Note: When you are unpacking the components make sure that
you do not unintentionally throw away any of the assembly materials.
Place the water container 12 on a flat and even supporting sur-
face near a mains socket (230–240 V~, 50 Hz).
Mount the lamp attachment assembly 1 on to the ornamental
stone 2 . To do this, position the lamp attachment 4 exactly
over the holes for the lamp attachment 3 and fix it firmly in
place by screwing in the screws 5 (see Figure A). Use a PH1
screwdriver to tighten the screws.