Florabest FBM 135 A1 - Manual (Page 72)

72
GB MT
• Preserve the engine:
- Unscrew the spark plug ( 17)
(see “cleaning and maintenance“);
- Pour a tablespoon of engine oil
through the spark plug hole into the
engine compartment;
- Pull the starter cord ( 28) slowly
several times with the safety catch
( 3) pulled in order to distribute
the oil inside the engine;
- Screw the spark plug ( 17) tight.
• Dispose of used oil and petrol resi-
dues in an ecofriendly manner (see
“disposal / environmental protection“).
There is no need to drain the petrol
tank if a fuel stabiliser is added to
the petrol (see “replacement parts”
and Briggs & Stratton instruction
manual).
Disposal / Environmental
Protection
• Return the tool, accessories and
packaging to a recycling centre when
you have finished with them.
- Carefully drain the petrol and oil
tanks and take your equipment to
a recycling centre. The plastic and
metal parts that are used can be
separated by type and thus recy-
cled.
- Take used oil and petrol residues
to a disposal point and do not pour
them into the sewer system or down
the drain.
- Ask our Service-Center for details.
• Defective units returned to us will be
disposed of for free.
• Do not throw cut grass in the dust-
bin but rather compost it or spread it
under bushes and trees as a mulch
layer.
Technical Specifications
Engine ..........................................4-stroke
Engine size ...................................135 cm 3
Power input ...................................... 1.96 kW
Blade rotation speed................. 2800 min -1
Blade torque ................................... 45 Nm
Wheel drive......................... max. 3.3 km/h
Petrol tank volume ..............................1.2 l
Octane rating ....................................95-98
Engine oil tank volume .......................0.6 l
Spark plug .......................... Torch F6 RTC
Cutting circle .................................460 mm
Cutting height ............10-stage, 30-75 mm
Grass collection box volume................65 l
Weight (inc. collection box) ...............34 kg
Sound pressure level
(L
pA
) .................81.9 dB(A); K=3.0 dB(A)
Sound power level (L
WA
)
measured ......... 92.8 dB(A); K=2.15 dB(A)
guaranteed ...............................96 dB(A)
Vibration at the handle
(a
n
) .................... 7.276 m/s 2 ; K=1.5 m/s 2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be