beautypg.com

Initial operation, Gb mt – Florabest FBM 135 A1 User Manual

Page 65

background image

65

GB MT

Delivery Contents

Carefully unpack the appliance and check

that it is complete:

- Petrol lawn mower (pre-assembled)

- Collapsed handle bar

- Grass collection box

- Cable clamp

- Assembly accessories for fixing the

bar

- Spark plug wrench

- Quick guide

- Operating instructions

Initial Operation

Caution! Risk of injury from

rotating blades. Carry out work

on the equipment only when the

blade is switched off and sta-

tionary.

Before starting the equipment, you must

- Install the handle bar

- Install the grass collection box

- Install the starter cord

- Fill with engine oil

- Fill with petrol

Installing the Handle Bar

Caution! When installing the

handle bar, ensure that the

Bowden cables ( 9) are not

squashed.

1. Position the ends of the bottom

handle bar (6) in the two bar

slots (30) on the lawnmower.

2. Use the enclosed assembly ac-

cessories to screw the bottom

handle bar (6) to the bar slot

(30).

3. Fold out the top handle bar (2).

4. Lock the quick release tension-

ing levers (26) by pressing them

towards the top handle bar (2).

The tensioning levers must be

tightened and in contact with

the bar such that tensioning is

possible with average force.

To loosen the tensioning lever,

turn the nut (31) on the tension-

ing lever anticlockwise.

To tighten the tensioning lever,

turn the nut on the tensioning

lever clockwise.

5. Fix the Bowden cables (9) to the

bar using the cable clamp (7).

Installing the Starter Cord

1. Pull the safety catch (3) towards

the handle bar (2) and hold it.

2. Slowly pull the starter cord on

the starter handle (28) towards

the bar and hook the starter cord

into the starter cord guide (27).

3. Release the safety catch (3).

Installing the Grass Collection

Box

Caution: Do not operate the

equipment with the grass col-

lection box or impact protection

installed incompletely. Risk of

injury!

Remove the Protective Caps:

1. Remove the protective caps

(32) on the grass collection box

(24).

Fixing the Grass Collection

Box onto the Equipment:

2. Lift the rear impact protection (8).