beautypg.com

Gb mt – Florabest FBM 135 A1 User Manual

Page 66

background image

66

GB MT

3. Hook the grass collection box

(24) into the mounting provided

for this (33) on the rear of the

equipment.

4. Release the impact protection

(8). It holds the grass collection

box in position.

Dismantling the Grass Collec-

tion Box:

5. Lift the impact protection (8) and

remove the grass collection box

(24).

Filling with Engine Oil and

Checking the Oil Level

Place the equipment on a level

base.

1. Unscrew the oil filler cap and

dipstick (10) and pour oil into

the tank. The oil tank holds0,6 l

oil. Use brand oil (e.g. SAE 30).

2. To check the oil level, wipe the

dipstick (10) on a clean cloth

and replace it in the tank until it

stops.

3. After pulling it out, read off

the oil level on the dipstick.

The oil level should be in

the marked area between

the minimum and maxi-

mum marks.

4. Wipe off any spilt oil and

close the oil filler cap (10).

Check the oil level every time be-

fore mowing and add oil when the

lower marking point is reached.

Filling with Petrol

Warning! Petrol is flammable and haz-

ardous to health:

- Keep petrol in containers intended for

this purpose;

- Only refuel outdoors and never with

the engine running or when the ma-

chine is hot;

- Open the filler cap carefully to allow

excess pressure to escape;

- Do not smoke whilst refuelling;

- Avoid skin contact and inhalation of

the fumes;

- Remove spilt petrol;

- Keep petrol away from sparks, open

flames and other ignition sources;

- Dispose of leftover petrol in an envi-

ronmentally friendly way (see “Dis-

posal / Environmental Protection”).

- Do not use petrol/oil mixtures;

- Use normal or super unleaded

petrol;

- Only use clean, fresh petrol;

- Do not store petrol for longer

than one month, as its quality

deteriorates.

1. Unscrew the filler cap ( 20) and

pour in the petrol to the lower edge of

the filler.

Do not fill the tank entirely, to allow

the petrol room to expand.

2. Wipe away petrol residues around the

filler cap and close the filler cap.