Epson RX600 - Manual (Page 49)

Printing from Film 49
3. Load the transparency into the film holder and position it on the
document table.
Note:
❏ Place the film holder on the center of the document table.
❏ The base side of the film is the side where the film maker's name and
film ID numbers can be read correctly. Also, when you look at an image
on the film from the base side, the image should appear normally, not
as the reverse of it.
❏ Set the film correctly in the film holder and position the film holder
properly on the document table.
❏ Do not press the glass of the document table with too much force.
35 mm film strips 35 mm slides
1 1
2
3 2
4