Epson L-500V - Manual (Page 32)

32
Adding, Changing, or Removing
Frames
You can add, change, or remove a P.I.F. frame on an
existing photo using the frames stored in your camera.
(See page 26 for more information about P.I.F.)
1 Turn the Mode dial to playback.
2 Select the photo on which you want to add, change,
or remove a frame by moving the joystick to l or r.
3 Press the P.I.F. button. You see the first frame
stored in the camera or on your memory card. To
switch between frames in the camera and frames on
the memory card, move the joystick to l or r.
If the photo already has a frame, you see your photo
in the frame.
◗
To add or change a frame, select it by moving
the joystick to u or d, then press the
OK
button.
◗ To remove a frame from the photo, move the
joystick to u or d to select the
No Frame
option, press the OK button.
You can now print your framed picture directly from the
camera on supported Epson printers. For instructions,
see page 33.