Epson L-500V - Manual (Page 27)

27
To take a picture with a frame:
1 Turn the Mode dial to automatic, manual, or
continuous.
2 Press the P.I.F. button. The first frame stored in
the camera is displayed.
3 Select the frame you want by moving the joystick to
u
or d, then press the OK button. The selected
frame is displayed on the LCD screen. (If you stored
more frames on the memory card, move the joystick
to r to move to the memory card frames.)
Tip:
Most frames are available in both horizontal and vertical
designs. Make sure you choose the right orientation for
the picture you want to take.
4 Press the T (telephoto) or the W (wide-angle)
button to zoom in on or out of your subject as
necessary.
5 Center your subject in the frame.
6 Press and hold the shutter button halfway. The focus
frame turns green and the focus is set.
7 Press the shutter button all the way down. The
camera beeps as it captures your picture. (For
continuous shooting, hold down the shutter button
and release it when you’re finished.)