Specifications, Dimensions, Clearances to combustibles – Enviro Ascot 50-029 User Manual
Page 5: Dimensions clearances to combustibles
5
Specifications
D
IMENSIONS
:
��
�
�
��
�
��������
��
�
�
��
�
��������
��
��
�
��
�
��������
��
�
�
��
�
��������
��
�
�
��
�
��������
��
�
�
��
�
��������
��
�
�
�
�
��������
��
�
�
�
�
��������
��
�
�
��
�
��������
Height: 24
1
/
16
inches
(611 mm)
Width: 19
1
/
16
inches
(484 mm)
Depth: 15 5⁄8 inches
(397 mm)
Center of flue to ground without leveling legs:
18 3⁄8 inches
(467 mm)
Center of flue to ground with leveling legs (approx.):
19 inches
(483 mm)
Figure 1. Dimensions of the Ascot.
C
LEARANCES
TO
C
OMBUSTIBLES
:
A) Sidewall to unit
10 inches (254 mm)
B) Backwall to unit
21⁄2 inches (64 mm)
C) Corner to unit
21⁄2 inches (64 mm)
D) Ceiling bottom of unit 60 inches (1524 mm)
E) Floor
0 inches
(0 mm)
Must have hearth pad if installed on a carpeted surface.
If this unit is installed in an alcove the alcove must meet
these minimum dimensions:
Width
48 inches (1219 mm)
Height
60 inches
(1524 mm)
Maximum Depth
24 inches (610 mm)
WARNING: Operation of this heater when not connected to a properly installed and maintained venting
system or tampering with the vent safety shutoff system can result in carbon monoxide (CO) poisoning
and possible death.
�
�
�����
���� ����
��
�
�
�
��
�
�
�
��
��
�
�������� ����
�
�
��
��
�
�
�
��
�
Figure 2: Clearances to combustibles.