Hearth mount installation, Initial installation – Enviro Ascot 50-029 User Manual
Page 22
Initial Installation
H
EARTH
M
OUNT
I
NSTALLATION
:
This unit may be installed as a hearth mounted unit.
Install two 3’ inch pipes up the chimney to a seal plate and cap assembly, one exhaust pipe, and one air
intake pipe
Using venting manufactures coaxial to co-linear adapters at the unit and at the chimney termination.
Maximum vertical chimney height 15 feet (4.57 m)
15 feet (4.57m)
Maximum
Vertical Venting
If installed
on a carpeted
surfacea hearth
is required
2"-3" (51mm-76mm)
Collinear Pipes
Existing Masonry
Chimney
Lock Damper in
the Open Position
Seal Plate &
Cap Assembly
Coaxial to
Collinear
Adapter
Figure 28: Hearth Mount Installation.
22