Enviro Ascot 50-029 - Manual (Page 25)

25
Secondary Installation
I
NSTALLATION OF
L
OG
S
ET AND
E
MBERS
:
The placement of the logs is not arbitrary.
If they are positioned incorrectly, the
flames can be “pinched” and will not
burn correctly. The burner come with
four (4) locator pins (see Figure 32), and
the bottom logs have ledges which make
alignment easier. Using the pictures
provided, carefully set the logs in place.
NOTE: The logs are fragile and
should be handled gently.
CAUTION: Use only the type of ember
material supplied with this appliance. Due
to the irregular size of the ember material
there may be more than required. The use
of other foreign materials on the burners
may create dangerous conditions.
If over time, through cleaning and
servicing, these embers require
replacement, contact the nearest ENVIRO
dealer for replacement embers.
1. Carefully remove logs from box.
Check to ensure there is no damage. It
is very important to install all logs in their
proper position to insure safe, optimum
operating conditions.
2. Place the log set into the firebox.
Locate each log by seating it down onto
the burner tray support pins. Follow
the figures to the right for proper log
placement.
Figure 35. Log Placement Step 3.
Figure 34. Log Placement Step 2.
Figure 33. Log Placement Step 1.
Figure 32. Ascot Burner Tray.