EnGenius Technologies EOC5611P User Manual
Page 9
8
2 EOC5611P Multi-Function Instruction Guide
2.1 Access Point
In the Access Point Mode with WDS Function, EOC5611P function likes a central connection for any
stations or clients that support IEEE 802.11a/b/g network. Stations and Client must configure the
same SSID and Security Password to associate within the range. EOC5611P supports 4 different SSIDs
to separate different clients at the same time.
2.2 Access Point with WDS Function
EOC5611P also supports WDS function in Access Point Mode without losing AP’s capabilities.
Configure others Access Point’s Wireless MAC Address in both Access Point devices to enlarge the
wireless area by enabling WDS Link Settings. WDS function can support up to 8 different AP’s MAC
addresses.
Auction: Not every Access Point device has support WDS in Access Point Mode. It is recommended
using EOC5611P if you would like to use this service.