EnGenius Technologies EOC5611P User Manual

Page 64

Please refer to the last section to check Access point’s configuration.

Client Router

Step1

Step2

Select your country or region’s regulation.

Step3

Select Operation Mode to Client Router from System Properties.

Step4

Change your Local Area Network setting to Obtain an IP Address Automatically.

Step5

802.11a/b/g wireless network.

Step6

Use site survey to scan Access Points that are available in nearby area.

Step7

Select the AP you would like to associate with.

Step8

Setup the authentication settings that match to the Access Point’s setting.

Step9

Setup your WAN connection type given by your Internet Service Provider from WAN

Settings.

Step10

Press Apply to process all the configurations.

Auction: Client Router’s IP setting must match to the Access Point’s subnet.