EnGenius Technologies EOC5611P - Manual (Page 29)

28
4.5 Wireless → Wireless MAC Filter
Wireless MAC Filters is used to Allow or Deny wireless clients, by their MAC addresses, accessing the
Network. You can manually add a MAC address to restrict the permission to access EOC5611P. The
default setting is Disable Wireless MAC Filters.
0.
ACL Mode ACL Mode can help to deny or allow certain Client to access the network. Select
Disable, Deny MAC in the list or Allow MAC in the list from the drop down list.
MAC Address Filter Specify the MAC address manually.
Add Press Add to add the MAC address in the table.
Apply Press Apply to apply the changes.