EnGenius Technologies EOC5611P User Manual

Page 12

3 Computer Settings

3.1 Assign a Static IP

In order to configure EOC5611P, please follow the instruction below:

1. In the Control Panel, double click Network

Connections and then double click on the connection of

your Network Interface Card (NIC). You will then see the

following screen.

2. Select Internet Protocol (TCP/IP) and then click on the

Properties button. This will allow you to configure the

TCP/IP settings of your PC/Notebook

3. Select Use the following IP address radio button and

then enter the IP address and subnet mask. Ensure that

the IP address and subnet mask are on the same subnet

as the device.

4. Click on the OK button to close this window, and then

close LAN properties window.

Auction: IP Address entered in the TCP/IP Properties needs to be at the same subnet of the

EOC5611P IP Address. For example: EOC5611P’s default IP Address is 192.168.1.1 so the IP Address in

the TCP/IP settings could be 192.168.1.10.