9 network configuration example, 1 access point – EnGenius Technologies EOC5611P User Manual

Page 61

9 Network Configuration Example

This chapter describes the role of the EOC5611P with 4 different modes. The Access Point mode’s

default configuration is a central unit of the wireless network or as a root device of the wired

environment.

9.1 Access Point

Access Point

Step1

Step2

Select your country or region’s regulation.

Step3

802.11a/b/g wireless network

Step4

Use site survey to scan channels that have been used in nearby area.

Step5

Select channel with less interferences.

Step6

Specify the SSID for your broadcast SSID and you can also configure multiple SSID at

the same time.

Step7

Verify VLAN identifier to separate services among clients

Step8

Setup the authentication settings.

Step9

Press Apply to save all changes.

Note: For more advanced settings, please refer to the previous chapters.

Wireless Client

Step1

Select wireless mode you would like to associate with.

Step2

Use site survey to scan nearby Access Point and select the certain AP you would like