EnGenius Technologies EOC5611P User Manual

Page 67

4. After Press Edit, web should pop-out a window as below. You may enter your desire VLAN ID. Then,

press Save to save the changes.

5. Wireless Network webpage should have display all the VID as below. If you would like to enable

Wireless VLAN function, select the radio button of “Isolate all Profiles from each other using VLAN

standard” and then press Apply to configure the changes.

Note: Any Wireless clients associated with SSID1 to SSID4 cannot access to the management page

unless its Wireless VLAN ID is the same as the Management VLAN ID. Enable Profile Isolation will

also deny the communication between different groups of VID.

Auction: If you would like to use 802.1 x authentications (WPA/WPA2/WPA-Mixed) with VLAN tagging, you must

enable Management VLAN. For more details, please follow the instruction below.