EnGenius Technologies EOC5611P - Manual (Page 41)

40
MTU Specify the Maximum Transmit Unit size. Suggest remain in Auto.
IP Address Specify WAN port IP address.
IP Subnet Mask Specify WAN IP Subnet Mask.
Gateway IP Address Specify WAN Gateway IP address.
PPTP Server Specify PPTP Server IP address.
Username Specify the Username that is given by your ISP.
Password Specify the Password that is given by your ISP.
Connect on Demand Select the Radio button to specify the maximum idle time. Internet connection will
disconnect when it reach the maximum idle time, but it will automatically connect
when user tries to access the network.
Keep Alive Select the Radio button to keep internet connection always on. Specify the redial
period once the internet lose connection.
Get Automatically From
ISP
Select the Radio button for get the DNS automatically from DHCP server.
Use These DNS Servers Select the Radio button for setup the Primary DNS and Secondary DNS servers
manually.
Discard Ping on WAN Place a Check to Enable or Disable ping from WAN.
Apply / Cancel Press Apply to apply the changes or Cancel to return previous settings.
Auction: If the router's MTU is set too high, packets will be fragmented downstream. If the router's
MTU is set too low, the router will fragment packets unnecessarily and in extreme cases may be
unable to establish some connections. In either case, network performance can suffer.