4 client router – EnGenius Technologies EOC5611P User Manual

Page 63

WDS Bridge

Step1

Step2

Select your country or region’s regulation.

Step3

Select Operation Mode to WDS Bridge from System Properties.

Step4

802.11a/b/g wireless network.

Step5

Select channel you would like to use.

Step6

Setup the authentication settings

Step7

Setup WDS Link Settings.

Step8

Specify the AP’s MAC address you would like to connect with.

Step9

Press Apply to process all the configurations.

Auction: Each WDS bridge’s device must use the same Subnet, Wireless Mode, Wireless Channel, and Security Setting.

9.4 Client Router

In the Client Router Mode, the EOC5611P has DHCP Server build inside that allows many LANs

automatically generate an IP address to share the same Internet. Connect an AP/WISP Wirelessly and

connect to LANs via wired. Client Router Mode is act completely opposite to the AP Router Mode.