Eclipse - Fujitsu Ten ECLIPSE CD3200 - Manual (Page 55)

The Bluetooth hands-free function
55
IX
The "Waiting" message appears on
the display.
The cell phone is now connected to
the main unit.
( and appear on the display.)
"FAILED" will be displayed if
registration is not successful. Repeat
the connection procedure.
ATTENTION
Cell phones that have not been registered
cannot be connected.
Disconnecting a cell phone
The "Disconnect ?" message appears
on the display to confirm the
disconnection.
Registering phone number in the
phonebook
Phone numbers can be registered in the
phonebook of the main unit by transferring the
phonebook data from the cell phone.
A maximum of 500 phone numbers can be
registered for each cell phone.
The "DATA Receiving" message
appears on the display.
"FAILED" will be displayed if data
transfer is not successful. Repeat the
transmit procedure.
3
Press the [SELECT] (Up/Down)
button to select the cell phone to
be connected.
4
Press the [ENTER] button.
5
Press the [SELECT] (Up/Down)
button to select Connect.
6
Press the [ENTER] button.
7
"COMPLETED" will be displayed.
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Select
Phone.
2
Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select the cell phone to
be disconnected.
4
Press the [ENTER] button.
5
Press the [SELECT] (Up/Down)
button to select Disconnect.
6
Press the [ENTER] button.
7
Press the [ENTER] button.
8
"COMPLETED" will be displayed
when disconnection is successful.
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select
Phonebook.
2
Press the [ENTER] button.
3
Transmit phonebook data using
your cell phone.
4
"COMPLETED" will be displayed
when data transfer is successful.