Eclipse - Fujitsu Ten ECLIPSE CD3200 - Manual (Page 36)

36
Operation
The Bluetooth audio function
Operation About the Bluetooth audio
function
The use of Bluetooth wireless communication
technology enables a Bluetooth-compatible
portable audio player (hereafter called "a
portable device" ) to be used as a source for the
main unit.
Once the portable device is connected to the
main unit, it is possible to listen to music without
directly operating the portable device.
Because the connection between the portable
device and the main unit is wireless, cable
connection is not needed.
• Before using a Bluetooth-compatible portable
device (including cell phones) with the main
unit, be sure to complete the “Setting the
Bluetooth audio functions”. (See pages 38
and 39 for instructions)
• When the portable device has been
connected to the main unit, the Bluetooth
connection indicators will be displayed.
• Noise may be experience when using the
Bluetooth cell phone and Bluetooth audio.
• Depending on the version of Bluetooth, some
cell phones may not be able to communicate
with the main unit.
• Depending on the surrounding environment,
the connection may become unstable, and the
Bluetooth audio function may not be able to
be operated from the main unit.
ATTENTION
• If the portable device is used with other
wireless devices, it may have a negative
effect on the communication capabilities of
both.
• The Bluetooth communication connection
may cause the batteries in the portable
device to lose their charge quickly.
About the Bluetooth
specifications
The Bluetooth-compatible portable device to be
connected to the main unit must be compatible
with the following specifications. (However,
depending on the models of the portable device,
some of the functions may be limited.)
Supported Bluetooth specifications
Bluetooth Specification Ver.2.0
Supported profile
• A2DP (Advanced Audio Distribution Profile)
Version 1.0:
Profile for transmission of high quality
sound
• AVRCP (Audio/Video Remote Control
Profile) Version 1.0:
Profile for control of AV equipment by
remote-control
$NWGVQQVJCWFKQ
EQPPGEVKQPKPFKECVQT
$NWGVQQVJ
EQPPGEVKQP
KPFKECVQT