Eclipse - Fujitsu Ten ECLIPSE CD3200 - Manual (Page 49)

The Bluetooth hands-free function
49
IX
What is Bluetooth?
Bluetooth is a form of short-range wireless
communication technology used to connect cell
phones and personal computers.
This technology enables hands-free calling and
data transmission between Bluetooth-compatible
devices.
ATTENTION
Please check with your cell phone manual for
Bluetooth operation.
Bluetooth is a registered trademark of Bluetooth
SIG, Inc.
Selecting the Bluetooth hands-
free mode
The Bluetooth hands-free mode is
activated.
ATTENTION
• The Bluetooth hands-free mode can be
activated from any audio mode.
• At any time the [RTN/BAND] button can be
pressed to return to the previous step.
Making a call
This function enables you to dial phone numbers
from the main unit, or to make calls using the
stored phone numbers (phonebook) and
incoming/outgoing call history.
Making a call by dialing a phone
number
Calls can be made by dialing phone numbers
from the main unit.
Before dialing a phone number directly from the
main unit, set Dial Setting of the Phone Setting
selection mode to ON. (For details, refer to
"Enabling phone numbers to be input directly" on
page 57.)
Up:
Increases the number.
Down:
Decreases the number.
Right:
The cursor moves to the right.
Left:
The cursor moves to the left.
WARNING 1 2
• For safety reasons, the driver must
not operate the cell phone while
driving.
• State and local ordinances must be
strictly followed when using cell
phones.
1
Press the [ /MENU] button
1
Press the [ /MENU] button
2
Press the [MODE] button
repeatedly until the "Dial Input" is
displayed.
3
Press the [SELECT] (Up/Down)
button to input numbers between 0
and 9.
4
Press the [SELECT] (Right/Left)
button to move the cursor.
5
Repeat the Steps 3 and 4 to input
the phone number.