Eclipse - Fujitsu Ten ECLIPSE CD3200 User Manual
Page 103
If you have a question:
103
XXI
INFO 7
INTERNAL POWER SUPPLY
FAILURE IS OCCURRING
• Turn the ACC off, and then turn it on again to resume the
operation.
• If this condition persists, please contact your dealer.
LOAD
The CD changer is in the process of verifying the presence
of CDs after a magazine has been inserted into the CD
changer.
FILE ERR
NO VALID FILE IN CD-R OR
USB MEMORY
Confirm the file.
NO SUPPORT
DEVICE
USB MEMORY FORMAT NOT
SUPPORTED
Confirm the USB memory standards.
USB ERR
PROBLEM WITH DATA
TRANSMISSION
Confirm the USB memory connection.
ANTENNA
XM ANTENNA IS
DISCONNECTED
Connect the XM antenna.
NO SIGNAL
XM Satellite RADIO SIGNAL
RECEPTION FAILURE
Move to a place where a good signal can be received.
OFF AIR
NO BROADCASTING ON
SELECTED CHANNEL
Select another channel.
CHANNEL---
UNRECEIVABLE CHANNEL OR
NO AVAILABLE CHANNEL IN
SELECTED CATEGORY
Select another channel.
INVALID
NO RECEIVABLE CHANNEL
Select another channel.
ANTENNA
Sirius ANTENNA IS
DISCONNECTED
Connect the Sirius antenna.
CALL 888-539-
SIRIUS
NO SUBSCRIPTION TO THE
SELECTED CHANNEL
Subscribe to Sirius to receive Sirius Satellite radio services.
ACQUIRING
Sirius Satellite RADIO SIGNAL
RECEPTION FAILURE
Move to a place where a good signal can be received.
NO iPod
iPod IS NOT CONNECTED
Make sure the iPod is connected correctly.
READING...
iPod IS TRANSMITTING DATA
Wait until the message disappears before operating.
NO DATA
NO MUSIC FILES STORED IN
iPod
Check the files stored in the iPod.
ERROR1
iPod STOPS TRANSMITTING
DATA FOR SOME REASON
Check the iPod connection.
ERROR2
iPod SOFTWARE NOT
SUPPORTED
Check the iPod software.
OUTGOING
ERROR
TRANSMISSION IS
IMPOSSIBLE.
Check whether the cell phone is connected and confirm the
condition of the cell phone.
FAILED
CONNECTION ERROR/ERROR When registering:
Check whether the cell phone is Bluetooth-compatible
When connecting:
Check whether the cell phone has been registered in the
main unit.
MEMORY FULL
NO MEMORY SPACE
Delete the phonebook data of the main unit, and then
perform the registration again.
Information
Explanation and remedial action