Epson S70670 - Manual (Page 161)

Using the Control Panel Menu 161
The Print Logs Menu
These items are used to track consumables.
The Printer Status Menu
These items track printer use and settings.
The Network Setup Menu
indicates default settings.
Item Parameter Explanation
Print Job Log Sheet Print You can print the job information saved in the printer (up to 10
jobs). The information includes the media and ink used in each
job, making it easier to track the use of consumables.
Show Total Prints XXXXXX m
2
(XXXXXX ft
2
)
Select Show Total Prints to view the total area of media printed
(to a maximum of six figures).
Item Parameter Explanation
Print Status Sheet Print Print a status sheet showing current printer settings, and the
status of periodical replacement parts. Use this option to view a
variety of information about the printer on a single sheet and
help schedule the periodic replacement of parts.
myEpsonPrinter Status Not Started, Disabled,
Enabled You can see if myEpsonPrinter is enabled or disabled. If it is
enabled, the last uploaded time is displayed. This function is not
supported in some areas and some countries.
Last_Uploaded:, (Not
Uploaded), MM/DD/YY
HH:MM GMT
Firmware Version XXXXXXX,X_XX,XXXX View the printer Firmware Version.
Item Parameter Explanation
IP Address Setting
Auto - Choose whether IP addresses are obtained automatically (Auto)
or manually (Panel) using DHCP. If Panel is selected, enter an IP
address, subnet mask, and default gateway address. Contact your
system administrator for detailed information.
Panel IP: XXX.XXX.XXX.XXX
SM: XXX.XXX.XXX.XXX
DG: XXX.XXX.XXX.XXX
Bonjour On Choose whether Bonjour is used (On), or is not used (Off), in the
network interface.
Off