Operations during movie recording – Nikon KeyMission 170 User Manual
Page 51

32
Operations During Movie Recording
Notes About Movie Recording
B
Notes About Memory Cards
Use microSDXC memory cards with an SD Speed Class rating of 6 or faster for recording
movies.
• Use memory cards with a UHS Speed Class rating of 3 or faster when the image size/frame
rate is 2160/30p (4K UHD) or 2160/25p (4K UHD).
• When using a memory card with a lower Speed Class rating, movie recording may stop
unexpectedly.
B
Notes About Saving Images or Movies
The status lamps flash red slowly while images or movies are being saved. Do not open the
battery-chamber/memory card slot cover or remove the battery or memory card
while an indicator is flashing. Doing this could result in loss of data, or in damage to the
camera or the memory card.
B
Camera Temperature
• The camera may become hot when recording movies for an extended period of time or
when the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when recording movies, an alert
message is displayed on the screen for about five seconds and the status lamps flash red
quickly. Then, the camera automatically turns off.
Leave the camera off until the inside of the camera has cooled.
B
Notes About Recording at Low Temperature
When the battery temperature is below 0°C (32°F), movies with the size/frame rate set to
2160/30p, 2160/25p, HS 1080/4×, or HS 720/8× cannot be recorded.
• If the battery temperature is below 0°C (32°F) before you start recording, the size/frame
rate of the movie switches to 1080/30p or 1080/25p.
• If the size/frame rate of the movie is set to 2160/30p, 2160/25p, HS 1080/4×, or HS
720/8× and the battery temperature drops to below 0°C (32°F) while recording, the
camera stops recording and automatically turns off. The recorded movie is saved.
Operations During Movie Recording