Casio EA-200 - Manual (Page 48)

20020601
English
Channel Operation Post-Processing FFT Samples
0 Clear all channels ––– ––– –––
*1 Channel 1 0 Clear the selected channel. 0 None
2 Channel 2 *1 Auto-ID *1 d/dt
–––
3 Channel 3 2 Voltage ( ± 10V) 2 d/dt, d 2 /dt 2
(for Voltage probe)
4 Resistance 10 FFT-Real 1 to 14 Samples used
5 Period 11 FFT-Real, Imaginary (*6) 2 n (2-16384)
6 Frequency
7 Temperature (Celsius)
8 Temperature (Fahrenheit)
9 Light
10 Voltage (0-5V)
11 Absolute Time
4 SONIC Channel 0 Clear the SONIC channel. 0 None
*1 Meters *1 d/dt
2 Meters 2 d/dt, d 2 /dt 2
3 Feet –––
5 Period
6 Frequency
11 Absolute Time
5 DIG IN Port 0 Clear the digital input channel.
––– –––
*1 Active
6 DIG OUT Port Data String Output Loops Data string
0 Clear the digital input channel. 0 to 255 Output data element value –––
1 to 32 Number of output data elements
(*1)
10 Microphone 0 Clear the Microphone. *0 None
*1 Active 10 FFT-Real 1 to 14 Samples used
11 FFT-Real, Imaginary (*6) 2 n (2-16384)
11 Analog Out CH 3 1pin ±3Vout Data String Output Loops Data Output Selection Data string
0 Clear the analog out or speaker. *0 Data string ± 1.5 Output data element value
12 Speaker 1 to 65535 Number of output data elements
(*1) 1 Channel 1
2 Channel 2
3 Channel 3
10 Microphone
Pin No Trigger Threshold Trigger Edge (Operation = 5, 6)
*2 1pin Vin ( ± 10V) ± 10 Set input voltage threshold value *0 Rising edge to rising edge
–10 to +10. 1 Falling edge to falling edge
2 Rising edge to falling edge
3 Falling edge to rising edge
10 6pin Vin-low (0-5V) 0 to 5 Trigger Edge (Operation = 11)
*0 Rising edge
1 Falling edge
2 Rising and falling edge
• Channel = 1, 2, 3 or 4, Operation = 5, 6, 11
{ 1, Channel, Operation, Pin No, Trigger Threshold, Trigger Edge }
*: parameter value marked with asterisk are initial defaults. { 1, Channel, Operation, Post-Processing, FFT Samples }
α-1-1
Appendix A Command Tables
• Record Time for Operations 5, 6, and 11
must be 2, 1, and 1 respectively.
• Trigger Source for Channels 1, 2, 3, and 4
must be 2, 3, 4, and 12 respectively.
• Clock Source must be 10.
20020701
Command 1 - Channel Setup